top of page

Distortion Shielding

Distortion is not a new concept.   Distortion is the action of distorting (messing up and confusing the issue or thing) or the state of being distorted.


And if we do a bit of research and go back in time, we will see that the Faraday Cage was invented along these lines and was in existence in the early 1800s.


A Faraday cage or Faraday shield is an enclosure used to block electromagnetic fields.  A Faraday shield may be formed by a continuous covering of conductive material, or in the case of a Faraday cage, by a mesh of such materials. Faraday cages are named after scientist Michael Faraday, who invented them in 1836.


The chamber was grounded so that it created an electrostatic environment to bounce off incoming energy.

What I want to explain here is that yes, this Faraday enclosure or electrostatic environment did and does work - but I believe - only to a certain degree.  

This is because "Today's energy (via directed energy)  is so much stronger" than it was in the olden days. And this has to do with science and advancemenets in technology.


So, when shielding -- especially in today's time - we need a bit more oomph or added power when we block out directed energy signals and assaults.


Most of us realize that there is no escaping these assaults unless we are a bit proactive and decide to do something about them.    Thus, we learn through trial and error, what works for us and what doesn't.  

We also recognize that when we are stalked, we know explicitly that we need protection.  We know that we need to create barriers.  And we come to the understanding that we need to survive the harsh radioactive and myriad of assorted waves emitted through directed energy devices.


I have been writing about the different ways to block energy in these attacks for nearly 6 years...and I have also shared what happens when we fail to do so.   In this article, I want to add other pertinent information that will make it all work better.


A while back I shared how important it is to layer material in shielding.   For example, creating a multi-layered wall of rubber mats and zinc sheet metal or other metals, lead included in this layering...grounded fabrics on that and then tightly spaced rare earth magnets...etc.  

Still, even with all of this stuff between us and the energy coming in, I have found that this is where and why the above mentioned items may not be nearly enough in today's attacks.


There are two reasons for this. 

The first has to do with wave tunneling.    As it turns out, energy via directed energy - is tunable.  Meaning it can be adjusted - narrowed and widened in its path.   The stream of energy traveling in can also be increased in intensity.  Making it a whole lot stronger.   I like to call it - energy on steroids.

So, when the energy coming in at us meets up with our block, it might possibly penetrate the block. 

Here is how it works.  

The energy travels through the wall or floor and up against the block...and it slows down at the block.  However, due to a widening or narrowing of energy waves and also increased strength...some of that incoming energy can go around the shield (on the sides or above or below) or some waves have the ability to pass right through the shield, and still be able to locate us.


The other reason our blocks may not be strong enough to keep energy out is this.  I believe that today's energy is technologically smart in its delivery.  


By this I mean, a part of our biological and organic matter in our bodies is somehow tied in with the weapon for a more efficient delivery.  Or possibly to control the device.  Sort of A.I. in design.


For example, if we speak, or our heat field or electrical activity in the brain is sensed and detected by the weapon...these organic levels of being human - somehow trigger or activate the directed energy to find us and assault us. 


I also believe that most of this is set up remotely.

So, I want to take a few minutes here and talk about my newest findings in reference to blocking energy out. 


Speaking from personal experience, as time has passed and my own attacks have intensified, I began to feel that something was missing in my layered barrier.  

Yes, I had grounded my fabric and all metal that I use in my shielding..  And of course, I had used all of the materials that I just spoke of in this article.  

Still, a lot of the heavy energy coming in appeared to be spilling in all around my blocks and coming in through the very tiny open spaces in my design.   This concerned me greatly and made me realize I needed to rethink my strategy and design.


Now, even though the attacks were much lighter in feel during this ordeal...they were assaults nonetheless.   I was aware of them.  I felt them.  And to me - this did not feel like success.   


Over a period of 6 months, I came to understand that my blocked surface needed something more...the added oomph.   I felt my blocking needed to become more human like...breathing, know...all the things needed for life and activity.  I know this is not possible for inanimate objects, but I am making a point bear with me.


Basically, my wall needed movement and distortion and animation.   Not just the electrostatic aspect of a Faraday Cage, simply being plugged in via grounding of, by distortion I mean something else entirely.


Understandably, with directed energy - we have a lot of different waves of energy coming in at us.  For example, there are sound waves, radio waves, microwaves, light waves, and electromagnetic field waves...etc. 


I also believe that directed energy weapons are now combo weapons which are able to send an assortment of different waves in at us - all at one time.   This is why I believe there is a need for distortion and added power in shielding.  


Note:  you still want to use all the layering materials I talked about...however, at this conjuncture, you will want to add 2 more variations in the shielding. 

One - reflective and deflective materials - like a mirror with silver backing - placed in numerous spots throughout the wall of blocking materials.   The silver on the back of your mirror and the glass - reflects and deflects off a good number of incoming energy waves - mainly light waves.  


Adding the deflection and reflective aspect of blocking to the first materials I shared with you...the sum total of all layering - will help to create distortion or confusion for your directed energy signal as it attempts to pass through a wall.

My final finding has to do with sound.   Sound is a wave.   If you place sound machines in your shielding along with the other material and in the path of directed energy - it will create noise and chaos which has has an added blocking benefit.    A sound machine is also electromagnetic in its design. When electromagnetic energy meets up with electromagnetic energy, it bounces it.


Our goal is to bounce off and deflect all incoming energy.  And no one thing works  without all the other methods of blocking with them.


Ultimately, the secret to your success - is in the amount and level of distortion and bouncing off you create in your barrier. 

Again, distortion, in this case, is a deflection via mirrors, noise via sound machines, static - via grounded fabric.  And then all the passive material you layer with it.   Rubber, sheet metal, silver fabric, aluminum, lead sheet metal, iron etc.


What our goal is - is to make it difficult for energy to find you!   Make the energy slow down in its travel.

Another key issue here is - not only do you want to make your wall impenetrable, you want to make it as portable as possible. 


The wall can either be put up at night and taken down in the a.m. or you can make the wall mobile and move it around.  Other areas of blocking - like the floor...will have to be done a little differently. 


Note:   If you leave a barrier in place continuously or in one spot, Gang Stalkers will find ways of memorizing the blocked wall area and barrier placement and also your spaces between blocking. 


Once they do this...they will then realign their weapons and devices to pass through and around  the open areas they locate.  This is called wave tunneling.



Print Cite Share Feedback 

Also known as: barrier penetration, tunnel effect

Written and fact-checked by The Editors of Encyclopaedia Britannica

Last Updated: Jun 12, 2023 • Article History

My suggestion is ... don't allow them to do this.  Make it difficult for your gang stalkers to find you or the open spaces in your barrier. 


Creating your wall of protection is personal, but you must work at perfecting the design and your   protection in order to survive.


A final note here - it is very sad that I need to share something like this at all.   


In our homeland  and our own country, yes, our beautiful country where we have been free to live life...we should all be protected by our leaders...from the very things that bring us harm through tyranny.   


We are a good people, after all.   We are citizens who love our country and life.  This cannot be measured...for it fills our soul with gladness and belonging and thankfulness.

However, there are those out there who mean to shut us off and push us away from the home we love.  They do this through mob and organized stalking tactics.


There has never before in history (at least not in our day) - been a time that our own leaders and those in powers that be - turned on its citizens and turned them into threats. 


One minute we are all immersed and cared about in an accepting society...then the next, we are shoved out and pushed to the limit.   

bottom of page